您当前位置：
&&&&中频感应电源
中频感应电源相关产品
中频感应电源求购信息
中频感应电源黄页
中频感应电源供应信息
中频感应电源相关产品中频设备相关技术内容
中频电炉,中频电源,中频设备和配件及维修
中频电源,中频电炉,感应加热设备,电炉维修专业厂家-保定兴盛中频设备有限公司
河北保定兴盛中频设备有限公司
联系人：高先生
地址：保定清苑工业区金线河堤南，保清公路保沧高速桥北，兴盛路东行300米兴盛路9号
中频设备相关技术内容
主要应用及特点：
Main application and characteristics:
1、频率范围大，从1KHZ-20KHZ，可根据具体加热工件的大小或透热的深度要求进行匹配，适应范围大。
1, large range of frequencies, from 1 KHZ to 20 KHZ, according to the size of the specific heating workpiece or match the depth requirements of diathermy, adapt to the large range.
2、采用中频串联谐振结果，负载匹配简单，设备效率高且利用率高。
2, using medium frequency series resonance as a result, the load matching, simple equipment with high efficiency and high utilization rate.
3、逆变过程：使设备在大功率下的工作可靠性大大提高，设备大功率领域得到发展，100%设备暂载率得以实现。
3, inverter process: to make the work reliability of the equipment under high power is greatly increased, the equipment for high power fields development, equipment and temporary load rate achieved 100%.
4、高效节能：全功率范围内，极高的功率因数和电源效率，比可控硅中频，节电20-30%以上。
4, high efficiency and energy saving: full power range, high power factor and power efficiency, than the thyristor medium frequency, power saving more than 20-30%.
5、设备体积小，可选择范围大。
5, equipment, small volume, wide choice.
中频锻造加热炉
Intermediate frequency forging heating furnace
Scope of application:
突出特点：
Outstanding features:
频率范围大，
Frequency range is big,
1、采用IGBT功率器件，和我公司的第二代技术，设备结构简单，可靠性高，维修率低，客户可以自行方便维护，是目前应用最广泛的设备之一。
1, using IGBT power components, and our company the second generation of technology, equipment simple structure, high reliability, low maintenance rate, customers can convenient maintenance by oneself, is one of the most widely used equipment.
2、1KHZ-20KHZ,可根据具体加热工作的直径，选择合适的频率。
2, 1 KHZ - 20 KHZ, but according to the diameter of the heated concrete work, choose the appropriate frequency.
3、中频加热锻造炉整料（整体连续）加热时，感应圈长度为1000mm-3000mm，同时有多根料在加热，更保证了透热的效果。
3 forging furnace, medium frequency heating monolith (overall) continuously heated, length is 1000 mm - 1000 mm, induction coil, at the same time have more material in heating, more to ensure the heating effect.
4、中频锻造炉采用连续加热方式，感应圈内部的负载从室温升至1100℃时，负载的变化引起设备功率电流的不断变化，使设备功率利用率到90%以上，设备得以有效利用。
4 forging furnace, medium frequency using continuous heating mode, the inside of the induction coil load from room temperature to 1100 ℃, the change of the load cause the changing of equipment power current, make the equipment utilization rate of power to more than 90%, the equipment is able to effectively use.}